Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Firewall Security and Content Filtering 5-23
v1.0, January 2010
3. Enter the following information:
a. Enter a Profile Name. This name will become available in the firewall rules definition
menus.
b. From the Direction pull-down box, select whether the profile will apply to outbound,
inbound, or both outbound and inbound traffic.
c. Depending on the direction that you selected, enter the minimum and maximum
bandwidths to be allowed:
• Enter the Outbound Minimum Bandwidth and Outbound Maximum Bandwidth
in Kbps.
• Enter the Inbound Minimum Bandwidth and Inbound Maximum Bandwidth in
Kbps.
The minimum bandwidth can range from 0 Kbps to the maximum bandwidth that you
specify. The maximum bandwidth can range from 100 Kbps to 100,000 Kbps.
d. From the Type pull-down box, select whether the profile will apply to a group or
individual.
e. From the WAN pull-down box, specify the WAN interface (if in Load Balancing Mode)
for the profile.
• Click Apply. The new bandwidth profile will be added to the List of Bandwidth Profiles
table.
To edit a Bandwidth Profile:
1. Click the Edit link adjacent to the profile you want to edit. The Edit Bandwidth Profile screen
is displayed.
2. Modify the settings that you wish to change.
3. Click Apply. Your modified profile will display in the Bandwidth Profile table.
To remove an entry from the table, select the profile and click delete.
To remove all the profiles, click select all and then click delete.