Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Wireless Configuration 4-19
v1.0, January 2010
To restrict access based on MAC addresses:
1. Click the Network Configurations > Wireless Settings in the main/submenu.
2. Click the Setup Access List link to the right of the Wireless Settings tab. The Access Control
List tab and Available Wireless Stations tab appear on screen with the Access Control List
screen in view.
3. Select the Ye s radio button in the ACL Enable section of the screen to enable the access
control list.
The Trusted Wireless Stations table displays any wireless stations you have manually entered
or that were discovered by the VPN firewall within its range. If you have not added any
wireless stations to the table, or if the VPN firewall did not discover any wireless stations, the
Trusted Wireless Stations table will be empty. The access control list does not need to be
enabled to add or delete MAC address to the table.
4. Click Apply to save your settings. Now, only devices in this table will be allowed to wirelessly
connect to the VPN firewall.
Figure 4-4