Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
LAN Configuration 3-3
v1.0, January 2010
To modify your LAN setup, follow these steps:
1. Select Network Configuration > LAN Settings from the main/submenu.
The LAN Settings tabs (LAN Setup, LAN Groups, and LAN Multi-homing) are displayed
with the LAN Setup screen in view..
2. In the LAN TCP/IP Setup section, configure the following settings:
• IP Address. The LAN address of your VPN firewall (factory default: 192.168.1.1).
Figure 3-1
Note: If you change the LAN IP address of the VPN firewall while connected
through the browser, you will be disconnected. You must then open a new
connection to the new IP address and log in again. For example, if you
change the default IP address 192.168.1.1 to 10.0.0.1, you must now enter
https://10.0.0.1 in your browser to reconnect to the Web Configuration
Manager.