Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
2-8 Connecting to the Internet (WAN)
v1.0, January 2010
To manually configure your WAN ISP Settings:
1. Select Network Configuration > WAN ISP Settings. The WAN ISP Settings screen is
displayed (see Figure 2-3 on page 2-5 for the entire screen).
2. In the ISP Login section, choose one of these options:
• If your ISP requires an initial login to establish an Internet connection, click Yes (this is
the default).
• If a login is not required, click No and ignore the Login and Password fields.
3. If you clicked Ye s, enter the ISP-provided Login and Password information.
4. In the ISP Type section, select the type of ISP connection you use from the two listed options.
(By default, “Other (PPPoE)” is selected.)
• Other (PPPoE). If you have installed login software such as WinPoET or Ethernet, then
your connection type is PPPoE. Configure the following fields:
– Account Name. Valid account name for the PPPoE connection.
– Domain Name. Name of your ISP’s domain or your domain name if your ISP has
assigned one. In most cases, you may leave this field blank.
Figure 2-6
Figure 2-7