Manualshelf

Quick Reference Guide

ManualsBrandsNetgear ManualsNetworkingSRXN3205
231232233234235236237238239240
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Default Settings and Technical Specifications A-1
v1.0, January 2010
Appendix A
Default Settings and Technical Specifications
You can use the reset button located on the rear panel to reset all settings to their factory defaults.
This is called a hard reset.
• To perform a hard reset, press and hold the reset button for approximately 10 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in Table A-1 below.
• Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Default Settings
Table A-1. VPN firewall Default Configuration Settings
Feature Default Behavior
VPN Firewall Login
User Login URL https://192.168.1.1
User Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address Uses default address as printed on bottom label
WAN MTU Size 1500
Port Speed 10/100/1000 AutoSense
Local Network (LAN)
Lan IP Address 192.168.1.1
Subnet Mask 255.255.255.0
RIP Direction None
RIP Version Disabled
RIP Authentication Disabled
DHCP Server Enabled