Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Monitoring System Performance 10-13
v1.0, January 2010
• IP Address. The current IP address of the computer. For DHCP clients of the VPN firewall,
this IP address will not change. If a computer is assigned a static IP addresses, you will need to
update this entry manually if the IP address on the computer has been changed.
• MAC Address. The MAC address of the PC’s network interface.
• Group. Each PC or device can be assigned to a single group. By default, a computer is
assigned to Group 1, unless a different group is chosen from the Group pull-down menu.
• Action. Allows modification of the selected entry by clicking edit.
Viewing the DHCP Log
To review the most recent entries in the DHCP log:
1. Select Network Configuration > LAN Settings from the main/submenu.
2. Click the LAN Setup tab. The LAN Setup screen is displayed (see Figure 3-1 on page 3-3).
3. Click the DHCP Log link to the right of the tabs. The DHCP Log popup window is displayed
(see Figure 10-9 on page 10-13).
.
To view the most recent entries, click refresh. To delete all the existing log entries, click clear log.
Note: If the VPN firewall is rebooted, the table data is lost until the VPN firewall
rediscovers the devices.
Figure 10-9