Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
10-10 Monitoring System Performance
v1.0, January 2010
Monitoring VPN Firewall Statistics
To display the VPN firewall statistics:
1. Select Monitoring > Router Status from the menu. The Router Status screen is displayed.
2. Click the Show Statistics link in the upper right-hand section of the screen. The Router
Statistics screen is displayed.
For each interface, the number of transmitted and received packets, the number of collided
packets, the transmitted and received Bytes per second, and the interface up-time are shown.
To set the poll interval:
1. Click the Stop button.
2. From the Poll Interval pull-down menu, select a new interval (the minimum is 5 seconds, the
maximum is 5 minutes).
3. Click the Set Interval button.
Monitoring the WAN Port Status
You can monitor the status of the WAN connection, the dynamic DNS server connection, and the
DHCP server connection. To monitor the status of the WAN port:
1. Select Network Configuration > WAN Settings from the main/submenu. The WAN ISP
Settings screen is displayed (see Figure 2-3 on page 2-5).
Figure 10-6