Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Monitoring System Performance 10-9
v1.0, January 2010
WAN
Configuration
For configuration,
see “Configuring
the Internet
Connection
(WAN)” on
page 2-4
• WAN State: UP or DOWN.
• NAT: Enabled or Disabled.
• Connection Type: Static IP, DHCP, PPPoE, or PPTP.
• Connection State: Connected or Disconnected.
• WAN IP Address.: The IP address of the WAN interface.
• Subnet Mask: The IP subnet mask of the WAN interface.
• Gateway: The gateway IP address for the WAN interface.
• Primary DNS: The IP address of the primary DNS server for the WAN interface.
• Secondary DNS: The IP address of the secondary DNS server for the WAN interface.
• MAC Address: The MAC address of the WAN interface.
Wireless
Configuration
For configuration,
see Chapter 4,
“Wireless
Configuration.”
• Wireless Status: Enabled or Disabled.
• SSID: The SSID that you have configured.
• Mode: a only, b only, g only, g and b, 11ng, or 11na.
• Security Settings: None, WEP, WPA, WPA2, or WPA and WPA2.
• Region: The region that you have configured.
• Channel: Auto, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, or 11.
• AP MAC Address: The MAC address of the Wireless Access Point.
Figure 10-5
Table 10-3. Router Status Fields (continued)
Item Description