Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Monitoring System Performance 10-7
v1.0, January 2010
• Increase this month limit by. Temporarily increase the Traffic Limit if you have reached
the monthly limit, but need to continue accessing the Internet. Select the checkbox and
enter the desired increase. (The checkbox will automatically be cleared when saved so that
the increase is only applied once.)
• This month limit. Displays the limit for the current month.
4. In the Traffic Counter section, make your traffic counter selections:
• Restart Traffic Counter Now. Select this option and click Apply to restart the Traffic
Counter immediately.
• Restart Traffic Counter at Specific Time. Restart the Traffic Counter at a specific time
and day of the month. Fill in the time fields and choose AM or PM and the day of the
month from the pull-down menus.
• Send e-mail report before restarting counter. An E-mail report will be sent immediately
before restarting the counter. You must configure the E-mail screen in order for this
function to work (see “Activating Notification of Events and Alerts” on page 10-1).
5. In the When limit is reached section, make the following choice:
• Block all traffic. All access to and from the Internet will be blocked.
• Block all traffic except E-mail. Only E-mail traffic will be allowed. All other traffic will
be blocked.
• Send E-mail alert. You must configure the E-mail screen in order for this function to
work (see “Activating Notification of Events and Alerts” on page 10-1).
6. Click Apply to save your settings.
The Internet Traffic Statistics section displays statistics on Internet Traffic via the WAN port.
If you have not enabled the Traffic Meter, these statistics are not available.
Note: Both incoming and outgoing traffic are included in the limit.
Warning: If the Block All Traffic radio button is selected, the WAN port shuts
down once its traffic limit is reached