Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
VPN Firewall and Network Management 9-9
v1.0, January 2010
3. Select the Check to Edit Password checkbox. The password fields become active.
4. Enter the old password, then enter the new password twice.
5. (Optional) To change the idle timeout for an administrator login session, enter a new number
of minutes in the Idle Timeout field.
6. Click Apply to save your settings or Reset to return to your previous settings.
Enabling Remote Management Access
Using the Remote Management screen, you can allow an administrator on the Internet to
configure, upgrade, and check the status of your VPN firewall. You must be logged in locally to
enable remote management.
Figure 9-2
Note: After a factory default reset, the password and timeout value will be changed
back to password and 10 minutes, respectively.
Note: Be sure to change the default configuration password of the firewall to a very
secure password. The ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both upper and lower case), numbers,
and symbols. Your password can be up to 30 characters. See “Changing Passwords
and Administrator Settings” on page 9-8 for the procedure on how to do this.