Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Virtual Private Networking Using SSL 7-19
v1.0, January 2010
If a needed network resource has not been defined, you can add it before proceeding with
this new policy. See “Adding New Network Resources ” on page 7-13.
• If you choose IP Address, enter a descriptive policy name in the Policy Name field, enter
the specific IP Address, then choose the Service and relevant Permission from the pull-
down menus.
• If you choose IP Network, enter a descriptive policy name in the Policy Name field, enter
an IP Address and Subnet Mask, then choose the Service and relevant Permission from
the pull-down menus.
Figure 7-10
Figure 7-11