Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Virtual Private Networking Using SSL 7-15
v1.0, January 2010
7. From the Object Type pull-down menu, select one of the following:
• IP Address. Enter an IP address or fully qualified domain name in the IP Address/Name
field.
• IP Network. Enter the IP network address in the Network Address field. Enter the mask
length in the Mask Length (0-31) field.
8. Enter the Port Range or Port Number for the IP address or IP network you selected.
9. Click Apply to add the IP address or IP network to the resource. The new configuration
appears in the Defined Resource Addresses table, as shown in Figure 7-7.
Configuring User, Group, and Global Policies
An administrator can define and apply user, group and global policies to predefined network
resource objects, IP addresses, address ranges, or all IP addresses and to different SSL VPN
services. A specific hierarchy is invoked over which policies take precedence. The VPN firewall
policy hierarchy is defined as:
1. User Policies take precedence over all Group Policies.
2. Group Policies take precedence over all Global Policies.
Figure 7-7