Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
7-14 Virtual Private Networking Using SSL
v1.0, January 2010
3. In the Add New Resource section, type the (qualified) resource name in the Resource Name
field.
4. In the Service pull-down menu, select the type of service to apply to the resource: either VPN
Tunnel or Port Forwarding.
5. Click Add.
The “Operation succeeded” message appears at the top of the screen, and the newly-added
resource name appears on the List of Resources table.
6. Adjacent to the new resource, click the edit button. The Add Resource Addresses screen is
displayed (see Figure 7-7 on page 7-15).
Figure 7-6