Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Virtual Private Networking Using SSL 7-11
v1.0, January 2010
– Create a static route on the corporate network’s firewall to forward local traffic intended
for the VPN tunnel clients to the VPN firewall.
• Select whether you want to enable full tunnel or split tunnel support based on your bandwidth:
– Full tunnel. Sends all of the client’s traffic across the VPN tunnel.
– Split tunnel. Sends only traffic destined for the corporate network based on the specified
client routes. All other traffic is sent to the Internet. Split tunnel allows you to manage
your company bandwidth by reserving the VPN tunnel for corporate traffic only.
Configuring the Client IP Address Range
Determine the address range to be assigned to VPN tunnel clients, then define the address range.
To configure the client IP address range:
1. Select VPN > SSL VPN from the main/submenu.
2. Select the SSL VPN Client tab. The SSL VPN Client screen is displayed.
Figure 7-5