Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
6-36 Virtual Private Networking Using IPsec
v1.0, January 2010
or server in the network when a user requests access to network resources. During the
establishment of a VPN connection, the VPN gateway can interrupt the process with an XAUTH
request. At that point, the remote user must provide authentication information such as a
username/password or some encrypted response using his username/password information. The
gateway will try to verify this information, first against a local User Database (if RADIUS-PAP is
enabled) and then by relaying the information to a central authentication server such as a RADIUS
server.
To configure the primary RADIUS Server:
1. Select VPN > IPsec VPN from the main/submenu.
2. Click the RADIUS Client tab. The RADIUS Client screen is displayed.
3. To activate (enable) the Primary RADIUS server, click the Ye s radio button. The primary
server options become active.
4. Configure the following entries:
• Primary RADIUS Server IP address. The IP address of the RADIUS server.
Figure 6-20