Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Virtual Private Networking Using IPsec 6-11
v1.0, January 2010
Viewing VPN Firewall VPN Connection Status and Logs
To view recent VPN tunnel activity, select VPN > Connection Status from the main/submenu.
The IPSec VPN Connection Status screen is displayed.
You can set a Poll Interval (in seconds) to check the connection status of all active IKE policies to
obtain the latest VPN tunnel activity. The Active IPSec SA(s) table also lists current data for each
active IPsec SA (security association):
• Policy Name. The name of the VPN policy associated with this SA.
• Endpoint. The IP address on the remote VPN endpoint.
• Tx (KBytes). The amount of data transmitted over this SA.
• Tx (Packets). The number of packets transmitted over this SA.
• State. The current state of the SA. Phase 1 is “Authentication phase” and Phase 2 is “Key
Exchange phase”.
• Action. Allows you to terminate or build the SA (connection), if required.
To view VPN firewall VPN logs, select Monitoring > VPN Logs from the main/submenu. The
IPsec VPN Logs screen is displayed (see Figure 6-12 on page 6-12).
Figure 6-11