Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
6-8 Virtual Private Networking Using IPsec
v1.0, January 2010
2. Configure the following:
•From the ID Type pull-down menu, choose IP Subnet.
• Enter the LAN IP Subnet Address and Subnet Mask of the VPN firewall’s LAN. Check
the Connect using radio box and choose Secure Gateway Tunnel from the pull-down
menu.
•From the first ID Type pull-down menus, choose Domain Name and enter the FQDN
address of the VPN firewall.
• From the second ID Type pull-down menu, choose Gateway IP Address and enter the
WAN IP Gateway address of the VPN firewall.
3. In the left frame, click My Identity.
4. Configure the following:
•From the Select Certificate pull-down menu, choose None.
• From the ID Type pull-down menu, choose Domain Name.
• Leave Virtual Adapter disabled, and click your computer’s Network Adapter. Your
current IP address will appear.
5. Click Pre-Shared Key. The Pre-Shared Key window opens.
6. Click Enter Key, enter your preshared key, and then click OK. This key will be shared by all
users of the VPN firewall policy “client”.
Figure 6-7