Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Firewall Security and Content Filtering 5-33
v1.0, January 2010
2. Enter a user-defined name for this rule in the Name field.
3. From the Enable pull-down menu, indicate if the rule is enabled or disabled.
4. From the Protocol pull-down menu, choose either TCP or UDP transport protocol.
5. In the Outgoing (Trigger) Port Range fields:
a. Enter the Start Port range (1 - 65534).
b. Enter the End Port range (1 - 65534).
6. In the Incoming (Response) Port Range fields:
a. Enter the Start Port range (1 - 65534).
b. Enter the End Port range (1 - 65534).
7. Click add. The port triggering rule is added to the Port Triggering Rules table.
To edit or modify a rule:
1. Click edit in the Action column opposite the rule you wish to edit. The Edit Port Triggering
Rule screen is displayed.
2. Modify any of the fields for this rule.
3. Click Reset to cancel any changes and return to the previous settings or click Apply to save
your modifications. Your changes will appear in the Port Triggering Rules table.
Figure 5-19