Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
5-24 Firewall Security and Content Filtering
v1.0, January 2010
Setting Schedules to Block or Allow Specific Traffic
If you enabled content filtering on the Block Sites screen, or if you defined an outbound or
inbound rule to use a schedule, you can set up a schedule for when blocking occurs or when access
is restricted. The firewall allows you to specify when blocking will be enforced by configuring one
of the Schedules—Schedule 1, Schedule 2 or Schedule 3.
To invoke rules and block keywords or Internet domains based on a schedule:
1. Select Security > Schedule from the main/submenu.
The Schedule 1 screen is displayed as the default selection, along with tabs for Schedules 2
and 3. .
2. Check the radio button for All Days or Specific Days. If you chose Specific Days, check the
radio button for each day you want the schedule to be in effect.
3. Check the radio button to schedule the time of day: All Day, or Specific Times. If you chose
Specific Times, enter the Start Time and End Time fields (Hour, Minute, AM/PM), which
will limit access during certain times for the selected days.
4. Click Apply to save your settings to Schedule 1.
Repeat this procedure to set schedules for Schedule 2 and Schedule 3.
Figure 5-14