Installation Guide
Hardware Overview
1
2 3 4 5
6
7
Attach the Mounting 
Base
Orbi Pro Router
(Model SRR60)
Ethernet cable
Power adapter 
(varies by region)
Package Contents
Rubber feet
Ceiling-Mount Your  
Orbi Pro
Wall bracket
1
2
1
1
2
3
4
Ceiling bracket
T-bracket with screw T-bracket screws
Wall anchors with screws
Mount base
Mount cover
Loosen the pre-installed screw on 
the T-bracket so that the locking 
plate on the T-bracket can slide. 
Then secure the T-bracket to the 
T-bar and tighten the screw.
2
Wall-Mount Your  
Orbi Pro
Before you can wall mount or ceiling 
mount your Orbi Pro router or satellite, 
you must attach the mount base and 
cover to your router or satellite.
Mount base 
screws
1
Ring LED (not shown in image)
2
Sync button 
(also used for WPS connection)
3
Internet port 
(the Orbi Pro Satellite does not 
include an Internet port)
4
Ethernet ports
5
Power On/Off button and 
Power LED
6
DC Power connector
7
Reset button
1
Orbi Pro Router
Orbi Pro Satellite
2
4 5
6
7
PRO
Quick Start
Orbi Pro Satellite
(Model SRS60)
Note:  The number of each item that 
comes in your package depends on 
which Orbi Pro kit you buy.
Attach the T-bracket to the ceiling 
bracket with the T-bracket screws.


