User Manual

Factory Settings
You can return the Orbi Pro router or satellite to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Reset button on the back of the router or satellite for at least seven seconds.
The router or satellite resets, and returns to the factory settings.
Factory Settings for Orbi Pro Router
The following table shows the factory default settings for the Orbi Pro router.
Table 4. Factory default settings for the router
Default SettingFeature
orbilogin.comUser login URLRouter
login
adminUser name (case-sensitive)
passwordLogin password
(case-sensitive)
Use default hardware addressWAN MAC addressInternet
connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.1LAN IPLocal
network
(LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
GMT for WW except NA and GR,
GMT+1 for GR, GMT-8 for NA
Time zone
DisabledTime zone adjusted for daylight
saving time
DisabledSNMP
Disabled (except traffic on port 80,
the HTTP port)
Inbound (communications
coming in from the Internet)
Firewall
Enabled (all)Outbound (communications
going out to the Internet)
DisabledSource MAC filtering
Supplemental Information
117
Orbi Pro