User Manual
Table Of Contents
- Contents
- 1. Overview
- 2. Manage Your Orbi Pro Ceiling Satellite
- Update the Orbi Pro Ceiling Satellite and Orbi Pro router firmware
- Enable the Sync button
- Turn the satellite LEDs on or off
- Change the satellite device name
- View satellite information in the router web interface
- View the satellite status in the satellite web interface
- Reset the satellite to factory defaults
- About link aggregation
- 3. Troubleshooting
- A. Supplemental Information
3
4 5
6
7
Figure 3. Bottom panel (facing the ceiling or wall) and back panel
1. Power LED. For more information, see Power LED on page 9.
2. LED bar. For more information, see LED Bar on page 9.
3. DC power connector. You do not need to connect a DC power adapter if you use
a PoE+ connection. Otherwise, connect the 12V, 2.5A power adapter that is in the
package.
4.
LAN 1 PoE+ port. This port supports both an Ethernet backhaul connection
and an optional PoE+ connection to a device that can provide 802.3at (PoE+) power.
5.
LAN 2 port. This port can function as a second Ethernet backhaul connection
in an 802.3ad link aggregation group (LAG) configuration or a static link aggregation
configuration. For more information, see About link aggregation on page 28.
User Manual8Overview
Orbi Pro Ceiling Satellite