User Manual
Table Of Contents
- Contents
- 1. Overview
- 2. Manage Your Orbi Pro Ceiling Satellite
- Update the Orbi Pro Ceiling Satellite and Orbi Pro router firmware
- Enable the Sync button
- Turn the satellite LEDs on or off
- Change the satellite device name
- View satellite information in the router web interface
- View the satellite status in the satellite web interface
- Reset the satellite to factory defaults
- About link aggregation
- 3. Troubleshooting
- A. Supplemental Information
3. Metal bracket with T-bar and lock screw and four short screws.
The metal bracket with T-bar and lock screw are for ceiling mounting. The four short
screws are used to attach the plastic mount to the metal bracket.
4. Plastic mount.
The mount can be used for either ceiling mounting or wall mounting.
5. Two tall screws and anchors.
The screws and anchors are used to attach the plastic mount to a wall.
Hardware overview
The following figure shows the top panel (facing away from the ceiling or wall) and the
next figure shows both the bottom panel (facing the ceiling or wall) and back panel with
the connections and buttons.
1
2
Figure 2. Top panel (facing away from the ceiling or wall)
User Manual7Overview
Orbi Pro Ceiling Satellite