User Manual
Table Of Contents
- Contents
- 1. Overview
- 2. Manage Your Orbi Pro Ceiling Satellite
- Update the Orbi Pro Ceiling Satellite and Orbi Pro router firmware
- Enable the Sync button
- Turn the satellite LEDs on or off
- Change the satellite device name
- View satellite information in the router web interface
- View the satellite status in the satellite web interface
- Reset the satellite to factory defaults
- About link aggregation
- 3. Troubleshooting
- A. Supplemental Information
1
Overview
This manual covers how to set up your Orbi Pro Ceiling Satellite model SRC60 and
configure its settings from the Orbi Pro router web interface.
For information about how to configure your Orbi Pro router, see the user manual for
your Orbi Pro router, which you can download by visiting
https://www.netgear.com/support/download/default.aspx.
This chapter contains the following sections:
• Supported Orbi Pro routers and satellites
• Package contents
• Hardware overview
• Mount the satellite on a drop ceiling or wall
• Sync your satellite with your Orbi Pro router
• Set up your Orbi network with the NETGEAR Insight mobile app
Note: The Orbi Pro Ceiling Satellite (SRC60) requires an Orbi Pro Router (SRR60), which
is sold separately. The Orbi Pro Ceiling Satellite does not support and does not pair
with an Orbi Home WiFi System router.
Note: For more information about the topics that are covered in this manual, visit the
support website at netgear.com/support/.
5