User Manual
Table Of Contents
- Contents
- 1. Overview
- 2. Manage Your Orbi Pro Ceiling Satellite
- Update the Orbi Pro Ceiling Satellite and Orbi Pro router firmware
- Enable the Sync button
- Turn the satellite LEDs on or off
- Change the satellite device name
- View satellite information in the router web interface
- View the satellite status in the satellite web interface
- Reset the satellite to factory defaults
- About link aggregation
- 3. Troubleshooting
- A. Supplemental Information
Factory settings
The following table shows the factory default settings for the Orbi Pro Ceiling Satellite.
Table 4. Factory default settings Orbi Pro Ceiling Satellite
Default SettingFeature
orbilogin.com or orbilogin.netUser login URLRouter and satellite
login
adminUser name (case-sensitive)
passwordDefault login password (case-sensitive)
Uses the default hardware addressWAN MAC addressInternet connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.250LAN IP addressLocal network (LAN)
255.255.255.0Subnet mask
Disabled
(The DHCP server of the Orbi Pro router issues
IP addresses.)
DHCP server
Worldwide: GMT
North America: GMT-8
Greece: GMT+1
Time zone
DisableTime zone adjusted for daylight saving
time
DisabledSNMP
Disabled (except traffic on port 80, the HTTP
port)
Inbound (communications coming in from
the Internet)
Firewall
Enabled (all)Outbound (communications going out to
the Internet)
DisabledSource MAC filtering
User Manual37Supplemental Information
Orbi Pro Ceiling Satellite