User Manual
Table Of Contents
- Contents
- 1. Overview
- 2. Manage Your Orbi Pro Ceiling Satellite
- Update the Orbi Pro Ceiling Satellite and Orbi Pro router firmware
- Enable the Sync button
- Turn the satellite LEDs on or off
- Change the satellite device name
- View satellite information in the router web interface
- View the satellite status in the satellite web interface
- Reset the satellite to factory defaults
- About link aggregation
- 3. Troubleshooting
- A. Supplemental Information
3
Troubleshooting
This chapter provides information to help you diagnose and solve problems you might
experience with your Orbi Pro Ceiling Satellite. If you do not find the solution here,
check the NETGEAR support site at netgear.com/support/ for product and contact
information.
If you need help with your Orbi Pro router, see your Orbi Pro router’s manual user
manual. You can view your router’s manual at
https://www.netgear.com/support/download/default.aspx.
This chapter contains the following sections:
• You cannot log in to the Orbi Pro router to configure the satellite
• The router and satellite do not sync
• The Power LED is blinking red
• You use PoE power and the Power LED is solid red
• Network disruption occurs when you use link aggregation
30