User Manual
Table Of Contents
- Contents
- 1. Overview
- 2. Manage Your Orbi Pro Ceiling Satellite
- Update the Orbi Pro Ceiling Satellite and Orbi Pro router firmware
- Enable the Sync button
- Turn the satellite LEDs on or off
- Change the satellite device name
- View satellite information in the router web interface
- View the satellite status in the satellite web interface
- Reset the satellite to factory defaults
- About link aggregation
- 3. Troubleshooting
- A. Supplemental Information
Mount the satellite on a wall
To mount the satellite on a wall:
1. Place the plastic mount on the wall.
2. Mark the wall where the two mounting holes are.
3.
If needed, drill holes.
4. Use the two wall anchors and tall screws to attach the plastic mount to the wall.
5. Slide the satellite onto the plastic mount.
User Manual13Overview
Orbi Pro Ceiling Satellite