Quick Start Manual

14 Installation
Linking to the Base Unit
The signal icon on the handset shows the link status between your
handset and the base unit.
• Link icon . Your handset and base unit are linked. They can
communicate.
• Lost Link icon . Your handset is not linked to the base unit.
They are not able to communicate. Make sure that the base unit
is plugged in. Take your handset closer to the base unit to
reconnect the link.
If you move too far away from the base unit while you are on the
phone, you will hear warning tones notifying you that your handset
is almost out of range (the link is lost). Take your handset closer to
the base unit or your call will be cut off shortly after the warning.