User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configure System Information
71
S3300 Smart Managed Pro Switch
Tw_sys_tx Echo (uSec) An integer that indicates the remote system's transmit
Tw_sys that was used by the local system to compute the
Tw_sys that it wants to request from the remote system.
Tw_sys_rx (uSec) An integer that indicates the value of Tw_sys that the
local system requests from the remote system. This value
is updated by the EEE Receiver L2 state diagram.
Tw_sys_rx Echo (uSec) An integer that indicates the value of the remote system’s
receive Tw_sys that was used by the local system to
compute the Tw_sys that it can support.
Fallback Tw_sys (uSec) An integer that indicates the value of fallback Tw_sys that
the local system requests from the remote system. This
value is updated by the local system software.
Tx_dll_enabled The initialization status of the EEE transmit Data Link
Layer management function on the local system.
Tx_dll_ready The transmit Data Link Layer ready status. This variable
indicates that the tx system initialization is complete and
is ready to update/receive LLDPDU containing EEE TLV.
This variable is updated by the local system software.
Rx_dll_enabled The status of the EEE capability negotiation on the local
system.
Rx_dll_ready The receive Data Link Layer ready status. This variable
indicates that the rx system initialization is complete and
is ready to update/receive LLDPDU containing EEE TLV.
This variable is updated by the local system
software.
Time Since Counters Last Cleared The amount of time that has passed since the Green
Ethernet information for this port was last cleared (since
the time of power up, or after EEE counters were
cleared).
Table 17. Green Ethernet Local Device Information (continued)
Field Description