User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configure System Information
60
S3300 Smart Managed Pro Switch
Figure 35. Daylight Saving Configuration
2. Next to Daylight Saving, select one of the following options:
• Disa
ble. Use this option to disable Daylight Saving Time (DST).
• Recurring. Use
this option to configure Recurring Daylight Saving. Summer time
occurs at the same time every year. The start and end times and dates for the time
shift must be manually configured.
• Recurring EU. Use t
his option to configure Recurring EU Daylight Saving. The
system clock uses the standard recurring summer time settings used in countries in
the European Union. When this field is selected, the rest of the applicable fields on
the screen are automatically populated and cannot be edited.
• Recurring USA. Use th
is option to configure Recurring USA Daylight Saving. The
system clock uses the standard recurring daylight saving time settings used in the
United States. When this field is selected, the rest of the applicable fields on the
screen are automatically populated and cannot be edited.
• Non Re
curring. Use this option to configure Non-recurring Daylight Saving. Summer
time settings are in effect only between the start date and end date of the specified
year. When this mode is selected, the summer time settings do not repeat on an
annual basis.
3. Th
e following fields are displayed only when Daylight Saving is Recurring, or Recurring
EU, or Recurring USA. Use the fields to set the start and end times for the time shift:
• Begins At. F
rom the appropriate lists, select the Start values of date and time on
which Daylight Saving begins:
- We
ek. Use this field to configure the start week.
- Day. Use th
is field to configure the start day.
- Mon
th. Use this field to configure the start month.
- Hours. Use t
his field to configure the start hours.
- Minu
tes. Use this field to configure the start minutes.
• Ends At. Fro
m the appropriate lists, select the End values of date and time on which
Daylight Saving ends.
- We
ek. Use this field to configure the end week.