User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configure System Information
48
S3300 Smart Managed Pro Switch
Click Update to update the page with the latest information on the switch.
IP Configuration
Use the IP Configuration screen to configure network information for the management
interface, which is the logical interface used for in-band connectivity with the switch through
any of the switch’s front-panel ports. The configuration parameters associated with the
switch’s network interface do not affect the configuration of the front panel ports through
which traffic is switched or routed.
To configure the network information for the management interface:
1. Select System
> Management > IP Configuration.
Figure 28. IP Configuration
2. Select the appropriate radio button to determine how to configure the network information for
the switch management interface:
• Dynamic IP Address (DHCP).
Specifies that the switch must obtain the IP address
through a DHCP server.
• Dynamic
IP Address (BOOTP). Specifies that the switch must obtain the IP address
through a BootP server.
Card Index Displays the index assigned to the selected card type.
Card Type Displays the hardware type of this supported card. This is a 32-bit data field.
Card Descriptor Displays a data field used to identify the supported card.
Supported Switch
Switch Model ID Displays the list of models of all
supported switches.
Switch Index Displays the index assigned to the selected switch.
Management Preference Displays management preference of th
e supported switch.
Table 12. Slot Information (continued)
Field Description