User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Hardware Specifications and Default Values
372
S3300 Smart Managed Pro Switch
Dual image support 1 Enabled
Factory reset 1 N/A
Table 115. System management
Feature Sets Supported Default
Multi-session web connections 4 Enabled
SNMPv1/V2c
SNMP v3
Max 5 community entries Enabled (read, read-write
co
mmunities)
Time control 1 (Local or SNTP) Local Time enabled
LLDP/LLDP-MED All ports Enabled
Logging 3 (Memory/Flash/Server) Memory Log enabled
MIB support 1 Disabled
Smart Control Center N/A Enabled
Statistics N/A N/A
Table 116. Other features
Feature Sets Supported Default
Timer Schedules 100 Type — Absolute
IGMP snooping v1/v2/v3 All ports Disabled
Configurations upload/download 1 N/A
EAPoL flooding All ports Disabled
BPDU flooding All ports Disabled
Static multicast groups 8 Disabled
Filter multicast control 1 Disabled
Number of static routes 32 N/A
Number of routed VLANs 15 N/A
Number of ARP Cache entries 512 N/A
Number of DHCP snooping
bi
ndings
8K N/A
Number of DHCP static entries 1024 N/A
Table 114. System setup and maintenance (continued)
Feature Sets Supported Default