User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Hardware Specifications and Default Values
370
S3300 Smart Managed Pro Switch
Interface Shaping Rate 0
802.1p to Queue Mapping (802.1p –> Queue) 0 -> 1
1 -> 0
2 -> 0
3 -> 1
4 -> 2
5 -> 2
6 -> 3
7 -> 3
Queue Minimum Band Width 0
Queue Scheduler Type Weighted
Auto-VoIP
Protocol-based
Admin Mode Disabled
Prioritization Type Traffic Class
Traffic Class 3
OUI-based
Admin Mode Disabled
Auto-VoIP VLAN 2
OUI-based priority 7
Table 111. Traffic control
Feature Sets Supported Default
Storm control All ports Disabled
Jumbo frame All ports Disabled
Max = 9216 bytes
Table 110. Feature Default Values and Default State (continued)
Feature Name/Parameter Default