User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Hardware Specifications and Default Values
365
S3300 Smart Managed Pro Switch
LAG Type Static
Local Link Discovery Protocol (LLDP)
Global
TLV Advertised Interval 30
Hold Multiplier 4
Reinitializing Delay 2
Transmit Delay 5
Fast Start Duration 3
Interface
Admin Status Tx and Rx
Management IP Address Auto Advertise
Notification Disabled
Optional TLVs Enabled
DHCP Snooping
Global
Admin Mode Disabled
MAC Address Validation Enabled
Interface
Trust Mode Disabled
Logging Invalid Packets Disabled
Rate Limit N/A
Burst Interval N/A
Persistent Configuration
Store Local
Write Delay 300
Audio/Video Bridging (AVB)
802.1AS
Global
802.1AS Status Disabled
Table 110. Feature Default Values and Default State (continued)
Feature Name/Parameter Default