User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Hardware Specifications and Default Values
364
S3300 Smart Managed Pro Switch
CST Spanning Tree Max Hops 20
MST Default Instance ID 0
MST Instance 0 Priority 32768
MST Instance 0 VLAN IDs 1,2,3
PV(R)STP UplinkFast Rate 150
Interface
CST STP Status Enabled
CST Auto Edge Enabled
CST Fast Link Disabled
CST BDPU Forwarding Disabled
CST Path Cost 0
CST Priority 128
CST External Path Cost 0
GARP
Interface
Join Timer 20 (centiseconds)
Leave Timer 60 (centiseconds)
Leave All Timer 1000 (centiseconds)
GVRP
Global
GVRP Mode Disabled
Interface
Port GVRP Mode Disabled
Link Aggregation
Lag Name ch<n> where n is 1 to 26
Description “ “
Admin Mode Enabled
STP Mode Enabled
Link Trap Enabled
Table 110. Feature Default Values and Default State (continued)
Feature Name/Parameter Default