User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Hardware Specifications and Default Values
362
S3300 Smart Managed Pro Switch
Stack Firmware Synchronization
Stack Firmware Auto Upgrade Disabled
Traps Enabled
Allow Downgrade Enabled
PoE
Global
System Usage Threshold 95%
Power Management Mode Dynamic
Traps Enabled
Interface
Admin Mode Enabled
Port Priority Low
Power Mode 802.3at
Power Limit Type User
Power Limit (mW) 30000 (mW)
Detection Type IEEE 802
Timer Schedule None
Virtual LAN (IEEE 802.1Q
Default VLANs 1 (Default),
4089 (Auto-Video)
Note:
1. All ports member of default VLAN
2. No ports member of Auto-Video VLAN
PVID 1
Acceptable Frame Types Admit All
Ingress Filtering Disabled
Port Priority 0
Jumbo Frames
Maximum Frame Size 1518
Table 110. Feature Default Values and Default State (continued)
Feature Name/Parameter Default