User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
360
B
B. Hardware Specifications and
Default Values
Switch Specifications
The switch conforms to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, IEEE 802.1D, IEEE
802.1p, and IEEE 802.1Q standards.
Table 108. S3300 Switch Specifications and Performance
Feature Value
S3300-28X 24 10/100/1000Mbps
2 10G/1G SFP+ ports
2 10G/1G/100M RJ45 ports
S3300-28X-PoE+ 24 POE+ 10/100/1000Mbps
2 10G/1G SFP+ ports
2 10G/1G/100M RJ45 ports
S3300-52X 48 10/100/1000Mbps
2 10G/1G SFP+ ports
2 10G/1G/100M RJ45 ports
S3300-52X-PoE+ 48 PoE+ 10/100/1000Mbps
2 10G/1G SFP+ ports
2 10G/1G/100M RJ45 ports
Flash memory size 64 MB Flash SPI
SRAM size and type 256 MB DDR3 SDRAM
Switching capacity Non-Blocking Full WireSpeed on all packet sizes
Forwarding method Store and Forward
Packet forwarding rate 10M:14,880 pps
100M:148,810 pps
1G:1,488,000 pps
10G:14,880,000 pps
MAC addresses 16K