User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Maintenance
312
S3300 Smart Managed Pro Switch
- Interface. The probe packet is sent from a specified interface. If you select this
option, the Interface field appears. Use the menu to select the interface from
which to send the probe packet.
Note: Values configured in the fields above are not saved to the switch. As a
result, refreshing the page sets these fields to the default values.
10. Click Apply to send a traceroute request to the specified IPv6 address or hostname. The
results are displayed below the configurable data in the TraceRoute Results area.
11. Click Cancel to cancel the operation on the screen and reset the data on the screen to the
latest value of the switch.