User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Managing Device Security
291
S3300 Smart Managed Pro Switch
number. If the sequence number is not specified by the user (i.e., the value is 0), a
sequence number that is one greater than the highest sequence number currently in use
for this VLAN and direction will be used. Valid range is (1 to 4294967295).
5. From the ACL Type list, select the type of ACL:
• IP ACL
• MAC ACL
• IPv6 ACL
6. From the ACL ID list, select the ID of the ACL to bind to the specified VLAN.
The ACL ID field displays all the ACLs configured, depending on the ACL Type selected.
7. Click the Add button.
To delete a VLAN binding:
1. Select the check box next to the VLAN with the ACL binding to remove.
2. Click the Delete button.