User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Managing Device Security
273
S3300 Smart Managed Pro Switch
In Figure 99 on page 273, the ACL rule is configured to check for packet matches on
ports 8, 9, 13, and LAG 1. Packets that have a source address in the 192.168.3.0/24
n
etwork are permitted to be forwarded by the interfaces. All other packets are dropped
because every ACL has an implicit deny all rule as the last rule.
Figure 99. ACL Wizard
9. Click the Add button.
To modify a rule:
1. Select
check box associated with the rule to remove.
2. Upda
te the match criteria as needed.
3. Click the Ap
ply button.
To remove a rule:
1. Select
check box associated with the rule to remove.
2. Click the Del
ete button.










