User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Managing Device Security
248
S3300 Smart Managed Pro Switch
The priority determines the order in which the TACACS+ servers are contacted when
attempting to authenticate a user. A value of 0 is the highest priority.
4. (Optionally) In the Port field, specify the authentication port value for TACAS+ server
sessions.
If you do not specify a value, the switch uses the standard TCP port 49 for sessions with
the server.
5. In the Key String field, specify the authentication and encryption key for TACACS+
communications between the switch and the TACACS+ server.
This key must match the encryption used on the TACACS+ server. The valid range is
0–128 characters.
6. (Optionally) In the Connection Timeout field, specify the amount of time that passes before
the connection between the device and the TACACS+ server times out.
If you do not specify a value, the switch uses a default value of 5.
7. Click the Apply button.