User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configuring Routing
222
S3300 Smart Managed Pro Switch
Remove an ARP Entry From the ARP Cache
Use this screen to remove certain entries from the ARP Table.
To remove entries from the ARP table:
1. Select Routing > ARP > Advanced > ARP Entry Management.
2. From the Remove From Table list, select the type of ARP entry to be removed.
The choices listed specify the type of ARP Entry to be deleted:
• All Dynamic Entries
• All Dynamic and Gateway Entries
• Specific Dynamic/Gateway Entry
• Specific Static Entry
• None Select this option if you do not want to delete any entry from the ARP Table.
3. If Specific Dynamic/Gateway Entry or Specific Static Entry is the selected type, enter the IP
address of the entry to remove from the ARP table.
4. Click the Apply button.