User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configuring Switching
193
S3300 Smart Managed Pro Switch
With MRP, network attributes are declared, registered, withdrawn, and removed completely
dynamically without any user intervention. This dynamic nature is especially useful in
networks where:
• Network attributes are likely to change frequently, requiring reconfiguration of the
intermediate devices.
• Recipients of these attributes frequently increase or decrease in number.
• Each of these changes without a dynamic self-adjusting framework would require
constant attention from the network administrator.
From the MRP link, you can access the following screens:
• MRP Configuration
• MRP Port Settings
• MMRP Statistics
• MVRP Statistics
• MSRP Statistics
• MSRP Reservation Parameters
• Qav Parameters
• MSRP Streams Information