User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configuring Switching
183
S3300 Smart Managed Pro Switch
The following table describes the MLD snooping querier status information on the screen.
Table 64.
Field Description
Operational State Specifies the operational state of the IGMP snooping querier on a VLAN:
• Queri
er. The snooping switch is the querier in the VLAN. The snooping
switch will send out periodic queries with a time interval equal to the
configured querier query interval. If the snooping switch sees a better
querier (numerically lower) in the VLAN, it moves to non-querier mode.
• N
on-Querier. The snooping switch is in non-querier mode in the VLAN. If the
querier expiry interval timer expires, the snooping switch moves into querier
mode.
• D
isabled. The snooping Querier is not operational on the VLAN. The
Snooping Querier moves to disabled mode when MLD Snooping is not
operational on the VLAN or when the querier address is not configured or
the network management address is also not configured.
Operational Version The MLD protocol version of the
operational querier.
Last Querier Address The IP address of the last querier from which a query was snooped on the VLAN.
Last Querier Version The MLD protocol version of the last querier from which a query was snooped on
the VLAN.
Operational Max Response
Ti
me
The maximum response time to be used in the queries that are sent by the
snooping querier.
To remove an MLD snooping querier configuration:
1. Sel
ect the check box next to each entry to remove.
2. Click the Del
ete button.