User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configuring Switching
155
S3300 Smart Managed Pro Switch
Configure OUI-Based Auto-VoIP
With Organizationally Unique Identifier (OUI)-based Auto VoIP, voice prioritization is provided
based on OUI bits.
From the OUI-based link, you can access the following pages:
• OUI-Based Properties on page 155
• OUI-Based Port Settings on page 155
• OUI-Based OUI Table on page 155
OUI-Based Properties
To configure OUI based properties:
1. Select Switching> Auto-VoIP> OUI-based > Properties.
2. In the VoIP VLAN ID list, select the VLAN to use to segregate VoIP traffic from other
non-voice traffic.
All VoIP traffic that matches a value in the known OUI list gets assigned to this VoIP
VLAN.
3. In the OUI-based priority list, select the 802.1p priority value to use for traffic that matches
a value in the known OUI list.
If the Auto VoIP mode is enabled and the interface detects an OUI match, the device
assigns the traffic in that session to the traffic class mapped to this priority value. Traffic
classes with a higher value are generally used for time-sensitive traffic.
4. Click the Apply button.
OUI-Based Port Settings
The port settings screen allows you to configure the OUI port settings.
To configure OUI port settings:
1. Select Switching> Auto-VoIP > OUI-based > Port Settings.
2. Select the interfaces to configure.
For information about how to select and configure one or more ports, see Configuring
Interface Settings on page 32.
3. In the Auto VoIP Mode list, select Enable to enable Auto VoIP on the selected interfaces.
The Operational Status field displays the current operational status of the interface.
4. Click the Apply button.
OUI-Based OUI Table
Device hardware manufacturers can include an OUI in a network adapter to help identify a
hardware device. The OUI is a unique 24-bit number assigned by the IEEE registration