User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configuring Switching
146
S3300 Smart Managed Pro Switch
VLAN Membership Configuration
Use this screen to configure VLAN port membership for a particular VLAN. You can select the
Group operation through this screen.
To configure VLAN membership for individual ports and LAGs:
1. Select Sw
itching> VLAN > Advanced > VLAN Membership.
2. From
the VLAN ID list, select the VLAN to which you want to add ports.
3. Click th
e Unit number icon below the VLAN Type field to display the physical ports on the
switch.
4. Click
the Unit number icon to display the LAGs on the switch.
5. T
o select the ports or LAGs to add to the VLAN, click the square below each port or LAG.
You can add each interface as a tagged (T) or untagged (U) VLAN member. A blank
squ
are means that the port is not a member of the VLAN.
• T
agged. Frames transmitted from this port are tagged with the port VLAN ID.
• Unt
agged. Frames transmitted from this port are untagged. Each port can be an
untagged member of only one VLAN. By default, all ports are an untagged member of
VLAN 1.
In the following figure, ports 8, 10, and 12 and LAG 1 are being added as tagged
members to VLAN 1.
Figure 85. VLAN Membership
6. Click the Apply button.