User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configure System Information
129
S3300 Smart Managed Pro Switch
8. Click the Add button.
9. Repe
at Step 6 through Step 8 to add the second rule.
You can add up to 20 static IP address-MAC address mappings to a DAI ACL.
Figure 76. DAI Rule Table
10. Select System> Services > Dynamic ARP Inspection > DAI VLAN Configuration.
11. Next to VLAN
100, select the check box.
12. In the ARP ACL Na
me field, specify the name of the DAI ACL to associate with the VLAN.
13. Click the Ap
ply button.
Figure 77. ARP ACL Name
Configure Optional DAI Features
If you configure the source MAC address validation option, DAI verifies that the sender MAC
address in an ARP packet equals the source MAC address in the Ethernet header. There is a
configurable option to verify that the target MAC address in the ARP packet equals the
destination MAC address in the Ethernet header. This check applies only to ARP responses,