User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configure System Information
127
S3300 Smart Managed Pro Switch
a. Select System> Services > Dynamic ARP Inspection > DAI Interface
Configuration.
b. Click the LAGS link to view
all LAG interfaces.
c. Nex
t to l1, select the check box.
d. F
rom the Trust Mode list, select Enable.
Figure 73. DAI Interface Configuration - LAGS
e. Click the Apply button.
3. Conf
igure rate limiting for ports 1–8, which are untrusted ports.
a. Click 1 in the interfa
ce-selection field to view all ports.
b. Select
each check box associated with ports 1–8.
c. I
n the Rate Limit field, type 10.
Figure 74. DAI Interface Configuration - Rate Limiting