User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configure System Information
104
S3300 Smart Managed Pro Switch
Figure 60. LLDP-MED Neighbors Information
2. In the LLDP-MED Interface Selection section of the window, the Interface field lists all the
ports on which LLDP-MED is enabled. Select the interface from the Interface list to display
information about that interface.
3. Table 35, LLDP-MED Neighbors Information below describes the non-configurable
LLDP-MED Neighbors information for the selected interface.
4. Click the Refresh but
ton to refresh the information on the page with the latest information
on the switch.