User Manual
Table Of Contents
- S3300 Smart Managed Pro Switch
- Contents
- 1. Getting Started
- Getting Started with the NETGEAR Switch
- Switch Management Interface
- Connect the Switch to the Network
- Discover a Switch in a Network with a DHCP Server
- Discover a Switch in a Network without a DHCP Server
- Configure the Network Settings on the Administrative System
- Access the Management Interface from a Web Browser
- Understand the User Interfaces
- Interface Naming Convention
- Configuring Interface Settings
- Online Help
- Registration
- 2. Configure System Information
- 3. Configuring Switching
- 4. Configuring Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Maintenance
- 8. Monitoring the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Table 34. LLDP-MED network policy information
Field Description
Network Policy Number The policy number.
Application The media application type associated with the policy, which can be one of
the fo
llowing:
• Unknown
• Vo
ice
• Guest V
oice
• Guest V
oice Signaling
• Softphone Voice
• V
ideo Conferencing
• S
treaming Video
• Video Signaling
A port can receive multiple application types. The application information is
di
splayed only if a network policy TLV has been transmitted from the port.
VLAN ID The VLAN ID associated with the policy.
VLAN Type Indicates whether the VLAN associated with the pol
icy is tagged or
untagged.
User Priority The priority associated with the policy.
DSCP The DSCP associated with a particular policy type.
Configure System Information
102
S3300 Smart Managed Pro Switch
LLDP-MED Port Settings
Use this screen to enable LLDP-MED mode on an interface and configure its properties.
To configure LLDP-MED settings for a port:
1. Select System > LLDP > Adva
nced > LLDP-MED Port Settings.